Somnetics Transcend Standard Base Station - 503033 - Base Station
Somnetics Transcend Standard Base Station is designed for added PAP stability on the bed stand. It is compatible with all Transcend PAP devices, Transcend Auto, Transcend EZEX and Transcend.
More Information
- Cleaning Instructions:
- Should be cleaned with a 5% solution of mild liquid detergent in distilled water (1.6 fl oz liquid cleaning detergent per quart of distilled water)
- Mild detergent should contain biodegradable anionic surfactants and no phosphate
- Periodic Cleaning Cycle 2x/Month
- Dampen a lint-free cotton cloth with the cleaning solution
- Wring excess water from the cloth and thoroughly wipe each surface using a back and forth or circular wiping motion
- Apply firm pressure and ensure contact with all accessible contact surfaces to adequately remove soil buildup
- Rinse the cotton cloth in distilled water to remove residual cleaning solution
- Wring excess water from the cloth then wipe the accessory to remove any cleaning solution remaining on its surface
- Dry surfaces by wiping with a dry, lint-free cotton cloth
- Be sure the accessory is fully dry before reassembling or usinG - Warning: Do not allow water or detergent solution to enter the Base Station.
Specification
Modes |
| Therapy | Patient | Clinician |
| 15-Sec Pressure Average | View Pressure | Set Pressure |
| | Set Ramp Pressure | Set Ramp Pressure |
| | Set Ramp Time | Set Ramp Time |
| | View EZEX Setting | Set EZEX Setting |
| | AHI | Reset Compliance Data |
| | Leak | Calibrate device |
| | Total Device Hour | |
| | Total Patient Hours | |
| | Device Faults | |
