Shopping Cart: 0 items
Your cart is empty.
MENU
Responsive Respiratory Respond O2 Dual Lumen Conserver with M6 Case - 130-0507 - 4.8\" L x 1.8\" W x
  • Responsive Respiratory Respond O2 Dual Lumen Conserver with M6 Case - 130-0507 - 4.8" L x 1.8" W x

Responsive Respiratory Respond O2 Dual Lumen Conserver with M6 Case - 130-0507 - 4.8" L x 1.8" W x

P11058

Responsive Respiratory Respond O2 Dual Lumen Conserver with M6 Case - 130-0507 - 4.8" L x 1.8" W x 1.4" H, 13.8 ozResponsive Respiratory Respond O2 Dual Lumen Conserver with M6 Case is a high-pressure oxygen regulator and conserving device that is combined into a single compact unit. It operates in the same manner as traditional oxygen pressure regulators with the added benefit of having a conserv...


$295.65


Responsive Respiratory Respond O2 Dual Lumen Conserver with M6 Case - 130-0507 - 4.8" L x 1.8" W x 1.4" H, 13.8 oz

Responsive Respiratory Respond O2 Dual Lumen Conserver with M6 Case is a high-pressure oxygen regulator and conserving device that is combined into a single compact unit. It operates in the same manner as traditional oxygen pressure regulators with the added benefit of having a conserving device included. The system is designed for use by an ambulatory patient with a high-pressure oxygen cylinder. Since the Respond C5 requires no electrical (battery) power source, it is a reliable and easy to use the device.


Features

  • Responsive Respiratory Respond O2 Dual Lumen Oxygen Conserver is a combined regulator and conserving device
  • It can function as a standard continuous flow regulator
  • It is also a conserving device which will increase a patient ambulatory time over that of continuous flow oxygen systems
  • In the Conserving Mode, the flow of oxygen is controlled by the patient inhalation, which triggers a sensing diaphragm within the control module
  • In either mode, the Respond C5 flow rates are adjusted by setting the flow control knob at the prescribed flow rate
  • The device can be easily switched between continuous or conserve mode without turning the device off
  • The Respond O2 Dual Lumen Conserving Regulator is 100% Conserver or 100% Regulator for added flexibility
  • Dual lumen technology offers higher sensitivity over traditional single lumen models.
  • It provides therapy and conserves oxygen by delivering the patient prescribed liter flow only during inhalation
  • The device has a compact one-piece aluminum body with all-brass in the high-pressure zone
  • It includes a click-style flow control with 10 flow settings
  • For additional safety and longer device life, it has a sintered bronze high-pressure inlet filter
  • 3:1 Conservation Ratio {1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6}
  • 100% conserver or regulator
  • No confusing electronics
  • Utilises demand cannulas
  • Includes flow at all settings
  • Continuous flow at all settings
  • Whisper quiet - ideal for church, movie or bingo outings


  • More Information

    • Removal of the Respond C5 from the cylinder:
      - Close the cylinder valve
      - Set the adjusting knob to the lowest flow setting and allow the regulator to de-pressurize
      - Be sure the contents gauge reads zero
      - Remove regulator from cylinder valve
    • Cleaning and Maintenance:
      - The exterior surfaces can safely be wiped off with a clean, lint-free cloth.
      - If the cloth is dampened with water, do not let water enter the relief valve or vent holes
    • Warning:
      - If grease or oil is visible or suspected to be present, DONOT use the device, and do not attempt to clean or repair it
      - Have it serviced by qualified personnel
      - If any leakage of the oxygen cylinder is detected, turn the valve stem or handle clockwise until the cylinder valve is closed
      - If leakage persists, place the cylinder outdoors and notify the gas supplier immediately

    Specification

    Specification

     
    Operating Pressure500 to 3000 PSIG
    Outlet Pressure Nominal22 PSI
    Selectable outlet flow1-5 LPM Conserving; 2-4 LPM continuous
    Oxygen ConservationNominal 75% at all setting based upon an avg I:E ratio
    Inlet ConfigurationCGA 870 Pin Indexed Yoke
    Outlet connectionCannula hose barb
    Unit Weight (degrees C)14 oz (0.9 lbs)
    Storage Temperature(degrees C)-20 to 60
    Operating Temperature (degrees C)0 to 40
    Diameter gage1-1/4"

    Warranty

    Three Years Warranty

    Current Reviews: 0