Shopping Cart: 0 items
Your cart is empty.
MENU
Precision Medical EasyComp Air Compressor - PM50 -
  • Precision Medical EasyComp Air Compressor - PM50 -

Precision Medical EasyComp Air Compressor - PM50 -

P10631

  Precision Medical EasyComp Air Compressor - PM50 - 10.25"L x 5.25"W x 9.5"H Precision Medical EasyComp Air Compressor is a powerful, high performance compressor that can be used anywhere effectively where convenient aerosol treatments are needed. The pressure gauge is slanted making it easier to read. It comes with a VELCRO brand strap for easy cord wrapping and non-m...


$275.00

 


Precision Medical EasyComp Air Compressor - PM50 - 10.25"L x 5.25"W x 9.5"H

Precision Medical EasyComp Air Compressor is a powerful, high performance compressor that can be used anywhere effectively where convenient aerosol treatments are needed. The pressure gauge is slanted making it easier to read. It comes with a VELCRO brand strap for easy cord wrapping and non-marring suction feet to attach the unit securely to most surfaces without damaging or marking the surface. The basic function is to supply a portable compressed air source adequate to drive high volume nebulizers.EasyComp Air Compressor HighlightsPowerful - High performanceVersatile - Anywhere effective and convenient aerosolEasy to UseLightweightSafety is assured

 

 

 

 

EasyComp Air Compressor Features

 

 

 

  • Precision Medical EasyComp Air? Compressor comes with hospital grade power cord
  • Powerful 1/5 horsepower high performance compressor delivers a minimum of 15 lpm at 50 psi
  • Safety is assured with the automatic resetting thermal limit switch which prevents the unit from overheating
  • Lightweight, weighing only? 10.8lb
  • Easy to carry by any caregiver
  •  

 

How To Operate EasyComp Air Compressor?

 

  1. Become familiar with the Compressor.
  2. Place Compressor near a properly grounded electrical receptacle on a table, floor or other horizontal, smooth, hard surface. Allow a minimum of 4 in. (10 cm) clearance on all sides to ensure adequate air flow for cooling of product.
  3. Press down on Compressor until Suction Feet are secure.
  4. Ensure the On/Off Switch is in the OFF position.
  5. Plug the Compressor into a properly grounded receptacle.
  6. Attach appropriate device to the Outlet Fitting, securely, without over-tightening.
  7. Press the On/Off Switch to the ON position.
  8. Adjust pressure.
    - To INCREASE pressure - Turn Knob CLOCKWISE
    - To DECREASE pressure - Turn Knob COUNTERCLOCKWISE
  9. Begin procedure.
  10. When procedure is complete, press the On/Off Switch to the OFF position.

 

  • Maintenance and Cleaning:
    - Turn the Easy Comp Compressor off and disconnect from any external power source before cleaning? 

  • To clean the filter (weekly):
    - Unplug Compressor.
    - Pry off filter end cap to check air filter for dust buildup.
    - If dust buildup occurs, remove air filter and wash in warm, soapy water and rinse.
    - Absorb excess water from filter with a dry towel.
    - Return filter and end cap

  • Cleaning for Exterior Components:
    - Disconnect the Aspirator from power source and other connections before cleaning
    - Use a cloth or sponge dampened with soap and water
    - Wipe dry with a clean cloth or paper towel
    - Store the Aspirator in a clean area free from grease, oil, and other sources of contamination

  • Caution:
    -
    This Easy Comp Compressor is not suitable for use in the presence of a flammable anesthetic mixture with air, oxygen, or nitrous oxide.

 

 

 

Specification

 

 

Particulars

Dimensions

Dimensions

Length: 10.25" (26.04cm)
Width: 5.3" (13.3cm)
Height: 9.5" (24.1cm)

Weight

Unit Weight: 10.8lb (4.9 kg)

Output

Minimum of 13 lpm @ 50 psi

Electrical

120VAC, 60Hz, 5Amps

Horsepower

1/5 Horsepower

Storage Conditions

Temperature: -4?F. to 120?F. (-20?C. to 40?C.)
Humidity: Max 95% Non-condensing

Operating Temperature Range

50?F. to 104?F. (10?C. to 0?C.)

 

Warranty

1 Year warranty

 


Current Reviews: 0