DeVilbiss IntelliPAP 2 Standard Heated Humidifier - DV6HH - Heated Humidifier
DeVilbiss IntelliPAP 2 Standard Heated Humidifier is a humidification device for IntelliPAP 2 machines. It is a space-saving unit comprised of a humidifier cradle and water tank and is designed to sit on top of the humidifier cradle. When used with IntelliPAP 2 machines, it is intended to release warm therapy air. With five levels of humidity, the desired amount of moist air can be tailored to each individual.
Features
- DeVilbiss IntelliPAP 2 Standard Heated Humidifier includes:
- Humidifier Cradle
- Water Chamber
- Different Levels of Humidity
-Standard heated humidifier is designed to offer a range of humidification options
- Level 1 is the lowest dose of humidity, while Level 5 is the highest
- Wave symbol located on top of the IntelliPAP 2 machine lights up to represent the functioning humidifier
- Humidification is not desired, the option may be turned OFF
- Compact Design Aesthetic
- Machines and heated humidifier are designed to join together to create a minimal footprint
- Stack the cream colored machine on top of the humidifier cradle
- Then, place the water chamber within the cradle to ensure the device is ready for use
- Design makes the combination of the machine and humidifier taller as opposed to longer
- Pieces may be separated for ease when cleaning or traveling
More Information
- Air Supply Port Cover
- When the IntelliPAP 2 machine and humidifier are connected, the air supply port cover folds into the circular crevice located on the back of the machine
- Water Chamber Cleaning Tips
- The water chamber for the IntelliPAP 2 Heated Humidifier needs to be cleaned daily
Note: The water chamber may be placed in the dishwasher for an occasional cleaning
- When placed in the dishwasher, the chamber must sit on the top rack
? For all other daily needs, hand wash the chamber with warm water and mild soap
- Steps to withdraw the chamber
- Gently press on the chamber release latch which is located at the front of the chamber
- Slide the chamber out of the cradle
- Locate and push forward on the chamber disassembly lever which is directly behind the chamber release latch
- The chamber will open into two halves
- Cleaning Tips for the Humidifier Cradle
- The cradle which holds the water chamber should be cleaned weekly
- Note: The cradle should not be submerged in water
- Instead, use a moist cloth to wipe the exterior of the unit
- Steps when preparing to clean the cradle
- Remove the power source to allow the heater plate to cool
- The cooling process may take up to 10 minutes
- Once cooled, withdraw the water chamber from the inside of the cradle
- Use the flow generator release button to separate the IntelliPAP 2 machine from the cradle base
- Use a moist towel to cleanse the cradle
- Instructions for Filling the Water Chamber
- When refilling the water chamber, use distilled water to help prevent mineral build-up
- The IntelliPAP 2 water chamber has water level indicators located on the sides and top of the chamber
- Do not surpass the specified markings when refilling the chamber, as it may cause water damage
- Sealing Gasket Maintenance
- Before each use, examine the sealing gasket surrounding the circumference of the chamber
- Ensure the gasket has been put back into place after each cleaning
Specification
Particulars |
Specifications |
Dimensions of Humidifier |
7.5"L x 6"W x 4"H |
Water Capacity |
375 mL |
Humidifier Cradle Material Components |
Polycarbonate, Latex Free |
Water Chamber Material Components |
Lexan Plastic, Latex Free |
Maximum Power Consumption |
40 watts |
DV6HH Electrical Requirements |
11 - 17 VDC powered from CPAP |
Heater Plate Thermal Cutout |
239?F (115?C) |
Heater Plate Temperature |
84?F to 158?F (29? to 70?C) |
Operating Temperature Range |
41?F to 104?F (5?C to 40?C) |
Operating Humidity Range |
15% to 93% R.H. non-condensing |
Operating Atmospheric Pressure Range |
70.0 - 106.0 kPA |
Weight of Humidifier |
1.87lb |
Warranty
5 years Warranty on Humidifier Cradle, 1 year Warranty on Water Chamber